Solid wood computer desk – A computer desk can be cheaper to build than home ready made purchased at the store. Construction Bureau, you can set the table height and adjust other office functions. It is best to start with a “cabinet” box design, which will allow you to notch or upper to your specifications by the Agency are building. Build a solid wood computer desk, Shelf 28 both half-by-8-inch-plates on a substrate. Mark screw locations on the two largest pieces of 3/4-inch timber. Measuring and marking of 29 inches from one end. Place the framing square with an edge against the side of the board, and make three points, one in the middle, and another point one inch in each side. Make sure that both of the major pieces, which side your desk, have exactly matching screw locations.
Measure 3/8 inch from the top, and make a dot bet 1 inch from the rear, mark a second point bet 6 inches from the back. Drill holes through the Office side every dot created for the screw holes using the wood of the 1/16-inch bit. Stick a thin line of wood glue to each end of the three 28 1/2-inch pieces. By default, the two sides of the solid wood computer desk edge with the back of the office down. Install the top piece, the top of the 8-inch cabinet.
37 Photos Gallery of: Build a Solid Wood Computer Desk
Install the bottom solid wood computer desk, Standard Office upright and attach the piece of plywood. Make sure that all four corners are aligned, and start with one screw insert 1 inch from each corner. On the lower side of the table Office center the keyboard tray.