Wine storage racks – Building your own wine storage racks is a great way to customize your wine store and easily adjust your storage capacity to meet the needs of your collection. A wine storage racks excellent gift and can be adapted to different requirements and situations, by staining or painting, the use of different kinds of wood or synthetic materials, and by the use of recycled or antique wood to make your rack. Building the wine storage rack requires minimal materials and equipment, can be reached quickly, and is easily repeatable process.
Build wine storage racks, set the four 24-inch sideboards in a square with equal sides, so that each plate butts against the past administration. Drill three regularly spaced holes through each joint with the holes enter the side of a shelf, and further to the end of the next. Use a drill bit that is slightly smaller than the dimensions of the wood screws. Secure the plates with wood screws. Measure two 34-inch boards and mark them directly in the center. Use saw to cut a hand-held or table saw on a half-inch wide groove that half of the width of each plate.
13 Photos Gallery of: Build Wine Storage Racks Design
Build wine storage racks, set the X-shaped wooden part inside the square earlier. If the interior section does not fit within the framework of the wooden square, trim some wood from the edges of the plates with the aid of sandpaper or a saw. Drill confirms two holes in each corner of the X-shaped support to the frame. Confirm by using screws made of wood. Sand any rough edges with the aid of sandpaper.