Mission Style Kitchen Cabinets – First, use a tape measure to determine the length, width and depth of the cabinet area. Second, locate the wall studs with a stud finder and mark them with a pencil on the wall of his mission style kitchen cabinets where it will be installed. Third, use the result of measurement of the height of cabinets draw horizontal lines on the wall to represent the upper and lower edges of the cabinet and mounting position mounting components finished cabinets. Fourth, use circular saws to cut wood 2 strips to the upper and lower wall piece, according to measurements.
Fiveth, drill a starter hole for wood moldings on the wall beams. Wood screws for attaching the straps on the wall. Sixth, use measurements to cut 5/8-by-3-inch MDF or wood planks to create a frame for each mission style kitchen cabinets door. Seventh, execution of thin beads of adhesive to a timber placed laterally to the upper and lower portions to form a frame. Eight, measure the opening to determine the size for the center panel of glass or wood. Add 1 inch to measure the opening, if you plan to install wood. (Skip to step 10 if you are going to install the glass).
0 Photos Gallery of: DIY Mission Style Cabinets
Nineth, pieces of 3/8 inch MDF or wood plank as measured install wood center panel. Run a thin bead of wood glue to the edges of the frame. Tenth, use a miter box and saws for cutting and forming rabbeted strips as measured by the sides, top and bottom at an angle of 45 degrees. Glue down and forming the frame of the door. Eleven, measure the opening and shortened the glass panes of measurements. Apply a thin bead of silicone clear along the edge of the hole on all doors. Gently lower the glass in place. Allow the silicone to cure and set up to 24 hours. Twelve, attach the equipment to the door hinges, in accordance with the instructions provided by the manufacturer of the door hinge. And determine the location cabinet knobs and handles. Use your carpenter pencil to mark the screw hole locations. Drill holes for mounting equipment for knobs and handles. Now your mission style kitchen cabinets is finish.