Pull out shelves for kitchen cabinets – To meet the need for crawling on your hands and knees to pick up something from the half shelves in your kitchen base cabinets, install pull out shelves in their place. Building sliding shelves require the use of a few power tools, but can be done by doing it yourself homeowner with confidence. Constructed from the 1/2-inch or 3/4-inch plywood, the pull out shelves are strong enough to cabinet door openings up to 18 inches long. Install full extension slides able to hold the weight of the contents of the lockers.
Install pull out shelves for kitchen cabinets, Measure the distance between the side members of the cabinet door opening. The stringers are vertical pieces of the cabinet front, sharing a larger opening in smaller openings. Cut a piece to match the measurement from the 4-by -48-by-3/4-inch plywood with the electric miter saw. Place the 20-by-48-by-1/2-inch plywood on a worktable.
12 Photos Gallery of: Install Pull out Shelves for Kitchen Cabinets
Subtract 1 inch from the length of the piece that you cut to full extension slide frame. Apply adhesive at the ends of two pieces of 2-by-18-by-1/2-inch plywood. Mark the 48-inch edge of the 19-by-48-by-1/2-inch plywood the same as the width of the front and back pieces that were just cut. Install full extension slides according to the manufacturer’s instructions. Set the pull out shelves for kitchen cabinets frame inside the cabinet, and let it rest on the half shelf. Set pull the shelf in full extension frame to check its fit. Remove it; hold the full pull-out frame. Secures the half shelf with drywall screws.