Resurfacing kitchen cabinets – Give your kitchen a whole new look by resurfacing cabinets. Resurfacing your cabinets is cheaper and often less intrusive than installing new ones. But before you redo your cabinets, make sure that doors and drawers are in good shape. When you know they are OK, just some simple supplies and a weekend or so. Remove the cabinet doors, using a screwdriver. Put them in the drop-cloth-covered area where you intend to work on them. Also remove the hardware. Place the hinges and screws in a small bowl and set them aside. Replace the hardware side, as well, if you intend to use it again.
Pull each drawer and remove the screws that hold the face to the base. Allocate drawer bases and Place the drawer faces in the area with the resurfacing kitchen cabinets doors. Mask off areas adjacent to the cabinet frames, including counters, floor and walls.
12 Photos Gallery of: Steps Resurfacing Kitchen Cabinets
The face of each resurfacing kitchen cabinets door and drawer face, plus the chassis frame with fine-grained sandpaper in four to five minutes. You must not completely remove the paint or stain. Just rough up the surface so the paint can adhere. Pick every door and drawer faces and gently shakes it to remove sanding dust. Pour 3 to 4 inches of the primer in a paint pot. Install new hardware, or use the ones you already have. Attach doors to the frame and faces of the drawers. Slide the drawer back into position.